Fluke Networks Products and Solutions

CERTIFICATION, TROUBLESHOOTING, and INSTALLATION tools for professionals who install and maintain critical network cabling infrastructure. Click Here for Fluke Test and Measuring Instruments.

Featured Copper Cable Test Solutions

Companies expect their Ethernet twisted pair cabling to work flawlessly, but corners cut during design, installation and testing result in network downtime which translates to wasted resources and lost revenue. This can be avoided by cable installers that can install copper cabling systems and locate faults quickly. By testing the installation with a network cable tester, installers and end users can ensure the performance and ROI of their investment. From 10BASE-T to tomorrow’s advanced twisted pair technology, Fluke Networks supplies you with the highest quality ethernet cable testers and is the industry’s most trusted partner for cabling testing.

linkiq kit
MicroScanner-kit

LinkIQ™ Cable+Network Tester

• Cable testing you trust, network testing you need
• Cable Performance testing up to 10GBASE-T
• Displays switch name, port number, data rates and VLAN
• Detects PoE class (1-8) and power, and performs a load test
• Displays cable length, wire map, and distance to open or short
• Manage results and print reports from LinkWare™ PC

MicroScanner™ Series

• Displays cable length, wire map, cable ID, and distance to fault
• Displays PoE class (1-8), power (to 90W) and voltage (MS-PoE)
• Locate and trace cables with IntelliTone™ or Pro3000 probes
• Tests RJ11, RJ45, and coax
• Displays network switch speeds up to 10G
• Ethernet Alliance PoE Certified for faster and easier integration

LinkIQ
Micromapper

CableIQ™ Qualification Tester

• Measure cabling performance (10/100/1000 Mbps)
• Displays port speed to 1G; POTS
• Distance to fault and wire map
• Tests twisted-pair, coax, and audio
• Locate and trace cables with IntelliTone or Pro3000 probes

MicroMapper™

• Verify correct and erroneous wire map
• Remote identifier enables one-person testing
• Locate and trace cabling with Pro3000 probe
• Tests twisted pair cables for open circuits, shorts, crossed pairs, reversed pairs and split pairs

Fiber Fault Location, Power Meters and Light Sources

Fiber optic communication systems require the right tools to commission new links and to troubleshoot existing links. Fluke Networks has a wide range of Fiber Optic testing products to help certify that power losses are within standards and to troubleshoot broken and high loss links on single mode and multimode fiber. Fluke Network fiber optic tools are designed to be rugged and reliable, and to get the job done.

Multifiberpro_03a
Fiber QuickMap

MultiFiber™ Pro MPO Loss Tester

• Automatic scanning and testing of 8 or 12 fibers in MPO connectors
• MM and SM versions available
• Cuts MPO test time 70% or more
• Automatically measures and reports polarity

Fiber QuickMap™

• Locates and displays connections and breaks in six seconds
• Tests MM fiber to 1,500 meters (4,921 ft)
• Large display shows loss in dB and distance in meters or feet
• Simple set-up

SimpliFiber® Pro_ftk1375
Visifault Locator

SimpliFiber® Pro Power Meter / Light Source

• Supports single-mode and multimode
• Measures and stores two wavelengths at once in a single record for faster testing
• Min/Max capability tracks intermittent power fluctuations

VisiFault™ Visual Fault Locator

• Locates tight bends, breaks and bad connectors
• Verifies polarity and identifies fibers
• Bright red visible laser light with continuous and flashing modes
• Durable, overmold case design

Copper Cable Toners and Probes

Get advanced vision for locating network cables more effectively at patch panels, switches, termination blocks, or hidden within bundles. Our Fault Locators, Toners and Probe Kits find the cables others can’t. Use digital mode to trace and locate data cabling safely and effectively on active networks. Use analog mode to isolate individual wire pairs, and trace voice, audio, and video cabling.

Pro3000
IntelliTone

Pro3000™ Analog Tone and Probe Family

• Filter technology blocks annoying “buzz”
• Identifies pairs with SmartTone™
• 10 mi (16 km) range
• Tones through drywall, wood, and other enclosures
• Angled bed-of-nails clips and RJ-11 connector

IntelliTone™ Pro 200 LAN Tone and Probe

• Digital toning eliminates noise and false signals
• Identify pairs with SmartTone™
• Locates active networks
• Visible end-to-end continuity test
• Built in wire mapper
• Works on twisted pair, audio, and video cabling

ts_100pro_2
Pockettoner_01a

TS™ Series Fault Finders

• Supports twoconductor cables up to 915 m (3,000 ft.)
• Displays distance to end or fault
• SmartTone™ positively identifies pair

Pocket Toner™

• Connects to any voice, data, or video cable to detect open/short circuits, continuity, AC/DC voltage and dial tone all while protecting up to 52 volts.

Fiber Cleaning and Inspection

Dust – just because you can’t see it doesn’t mean it’s not there. A 1-micrometer dust particle on a single-mode core can block up to 1% of the light (a 0.05dB loss). The only way to know it’s clean is to inspect it before you connect it. And if it’s dirty, it needs to be cleaned with the right tools or you might just make it worse. Know it’s clean with our cleaning and inspection tools.

fiber-optic-cleaning-kit
FI-500 FiberInspector

Fiber Optic Cleaning Kits

• Eliminates the #1 cause of fiber failure: contamination
• Supports wide variety of connectors
• Quick Cleaners for end-faces and ports
• Fiber solvent and cleaning cards leave no residue or dust

FI-500 FiberInspector™ Micro

• PortBright™ illumination for dark patch panels
• Clearly displays MM and SM
• Includes four UPC tips; APC available
• Auto-focus

Quick Clean
Launch Cables

Quick Clean™ Cleaners

• Available in 1.25 mm, 2.5 mm, and MPO styles
• Clean over 500 end-faces per unit
• Tip extender to 208 mm for hard-to-reach connectors

Test Reference Cords (TRCs) and OTDR Launch Cables

• Standards-compliant with reference grade connectors

Termination Tools and Telephone Butt-In Test Sets

For the industry’s most reliable datacom and telecom installation and testing products look to Fluke Networks. Whether it is copper, coax or fiber, Fluke Networks saves time and money with ergonomic tools and reliable, rugged test sets. With more than 50 million tools and test sets sold, Fluke Networks’ patented technology gets the job done right the first time.

D814™ Series Impact Tools

• Industry standard
• Incredibly durable with lifetime warranty
• Accepts standard industry blades
• Lightweight and easy to use
• Adjustable spring impact mechanism allows low impact for 24- and 26-gauge wire or high impact for 22-gauge wire

D914™ Series Impact Punchdown Tools

• Industry standard, internationally accepted
• Hook and spudger tools are built into the handle
• Automatic spring handle --choose low impact for 24/26 gauge wire or high impact for 22-gauge wire
• D914 and D914S impact punch down tools accept Phillips-head or flat screwdriver blade

Punchdown Tool Blades

• EverSharp™ blades stay sharper longer due to the special processing of the metal and blade design
• Standard blades available for many block types including popular Krone and BIX®
• Keep your blades organized and secure with our unique blade storage case

JackRapid™ Punchdown Tool

Patented jack termination tool allows you to terminate jacks 8 times faster.

Pro-Tool™ Kits

All the network tools you need (in one pouch) to cut, strip, clean and make connections.

D-Snips™ Heavy Duty Wire Strippers

Fluke Networks offers heavy duty wire cutters and strippers. These wire stripping tools cut and strip cables faster than any other wire stripping tool in industry.

Need-L-Lock Crimping Pliers

Patented four-in-one crimping plier tool combines the following:

Electrician's Snips

Our Electrician’s Snips are made from high-quality forged steel for strength and durability.

Modular Crimper

All-in-one wire crimping tool for fiber optics, ethernet cable and telephone wire plugs compatible with many 6- and 8- position modular telephone plugs

Can Wrenches

Our can wrenches allow universal access to telephone boxes and pedestals.

Wire and Cable Strippers

Cable strippers and Cutters include double slotted, plenum, round, coax and combo.

Cable Splicing Knife

Quickly and easily split cable sheaths.

Probe Pic

Use our Probe Pic to check for loose or damaged connections.

Modular Adapters

We offer a variety of standard and inline modular banjo adapters.

Voltage Detector

Easy-to-use handheld probe high voltage detector. Provides protection against hazardous voltages.

TS-25d-

TS™54

Combines advanced test set, toner, TDR and pair identifier in military grade rugged package

TS™22 Series

Rugged design with time-saving features

TS™25D

Feature-rich design for DSL installs

TS™52PRO

Military-grade ruggedness with display and advanced features